Rental Products - Construction and Access Sales Business Unit

• Access Equipment
• Construction Equipment
• Compaction equipment
• Welding Equipment
• Misc Equipment

Access Equipment

• 45ft
• 60ft
• 80ft
• 120ft

• 20ft
• 26ft
• 40ft

• Capacity 1,320lbs (600kg) or 2200lbs (1,000kg)
• Platform Length 2m, 3m, 7m

• 2,000lb Rack & Pinion Material Hoist
• 1,000lb / 2,000lb Portable Hoist

Construction Equipment

Air Compressors

• 185 cfm@ 120 psi
• 375 cfm@ 120 psi

Breakers

• 75-90 lb c/w lubricator and hose
   

• 20L Hydraulic Power Pack
• 12/25 kg Hydraulic Breaker
• 12” Hydraulic Saw

• Rotary Hammer
• Demolition Breakers
• From 5lb - 44lb Breakers

• Vacuum Pumps | Wellpoint Pumps
• Jet Pumps
• Trash Pumps

• 4x1,000 watts Metal Halide
• Mast Height 30'

• 7-30 KVA Range
• Sound Attenuated Enclosure

Compaction equipment

• Walk behind roller
• Plate compactor
• Rammer

Welding Equipment

D300K3+3 Portable Diesel Welder
Stick Welding with Five Output Taps and Fine Current Control DC CC Built to Red-D-Arc Extreme-Duty Specifications Fuel Efficient V1903 Kubota Diesel Engine 3,000 Watts AC Auxiliary Power
The pure DC generator with all copper coils provides excellent welding characteristics.The weldor's choice for pipeline welding and general construction work. Constant speed engine for instant arc starting. The V1903 Kubota diesel engine provides reliable, efficient operation in even the most severe conditions.

D500K5+3 Portable Diesel Welder
Full Range Amperage Control and Job Selector (OCV) Control DC CC Built to Red-D-Arc Extreme-Duty Specifications Fuel Efficient F-2803 Kubota Diesel Engine 3,000 Watts AC Auxiliary Power
For demanding jobs that call for high amperage capabilities using electrodes up to 1/4" in diameter and air carbon arc (CAC-A) gouging with carbons up to 5/16" in diameter. Precise control of both current control and open circuit voltage for optimum arc characteristics.

Mariner 5+3 Offshore Diesel Welder
Offshore Environmental Protection Package DC CC Fuel Efficient F-2803 Kubota Diesel Engine
3,000 Watts AC Auxiliary Power
The ultimate offshore-environmental welding package.The protective enclosure minimizes salt water intrusion and, with a built-in drip reservoir, all engine fluids are contained in the event of an oil or coolant leak. A lifetime pre-fuel separator protects the engine from fuel-borne contaminants, and the engine is protected from hydrocarbon over-running or explosion with an automatic over-run shut-down device.

MX350 Multi-Weld DC Converter
For Onsite Multiple Stick and Wire Welding DC+ CC CV Operates from Most Welders on 50 - 113 DC Volts Input A Single Welding Machine can Power Several MX350 Multi-Welds 350 Amps, 34 Volts @ 100% Duty Cycle Output per Unit
This system provides multioperator welding operation with a single power-source, since each individual MX350 shares the DC current of a single welder, whether electric-powered or engine-driven. Each Multi-Weld can be used for positive polarity CC stick or CV MIG and Flux-Cored wire welding.

E300 4Pak Multioperator Welding System
Modular Pak Design DC CC DP120 Power Distribution Panel Included For Stick Welding with up to 3/16" Diameter Electrodes
Ideal for shipyards, construction sites, or any job where operating multiple arcs from a single primary power source is an advantage. Up to 250 DC amps per arc with continuous output control. Individual welding modules permit easy access for service or repairs. Operates from a 120 amp service with either 460 VAC or 575 VAC three-phase input.

E500 4Pak Multioperator Welding System
Modular Pak Design
DC CC DP120 Power Distribution Panel Included
For High Amperage Stick Welding and Air Carbon Arc Gouging
All the benefits of the E300 Multioperator Pak System but with up to 625 amps DC from each module.
Each module has its own arc force control, potentiometer-type continuous output control and remote control receptacle. Built to Red-D-Arc Extreme-Duty specifications for dependable operation in even the
most severe conditions. Operates with either 460 VAC or 575 VAC three-phase electrical input.

Powermax 1000 Plasma Cutter
3/4" Recommended Capacity, 1" Maximum Capacity, 1 1/4" Severance Capacity
Powermax 1650 Plasma Cutter
1 1/4" Recommended Capacity, 1 1/2" Maximum Capacity, 1 3/4" Severance Capacity
These air/plasma cutters provide best-in-class cutting power and feature state-of-the-art, multi-voltage inverter
power supplies. Cut through mild steel, aluminum and most other metals with new power and productivity.

LN25 Voltage-Sensing Wirefeeder
For MIG and Flux-Cored Welding with 10-44 lb Wire Spools
Designed for .023-1/16" Solid, .035-5/64" Cored and .035-1/16" Aluminum Wire Sizes
Operates from all Welders with CV Capability for Maximum Versatility and Portability
Powered across-the-arc, so no control cables are required! Simply connect the welding cable to a power source, attach a work clip and you're ready to weld. Includes a voltmeter, gas solenoid, and an internal contactor. Can be operated with all electric and engine-driven welders with CV capability but can also be used with CC welders for
non-critical welds. Includes welding gun and cable assembly, as well as a properly sized drive-roll kit.

Misc Equipment

• Core rig c/w Drill
• vacuum pump 6" max

• 30 to 60 ton rollers
• 10 ton toe jack